Micanite Flat Resistors
GENERAL CHARACTERISTICS:
The Mica flat resistors are made of different materials for the external sheath, and with a type of internal insulator, making them suitable for all the contact heating applications, for standard operating temperatures.
These combinations allow the heater to express its potentials at its best, based on its application support and temperatures required
The raw materials quality used, the experience they are assembled with and detail care, make it absolutely efficient.
Some uses suggested
The Silicone Rubber, Mylar – Mica, Kapton and PTFE (Politetrafluoroetilene) flat resistors, and all heating cable types adapt to multiple uses, some of them in particularly important and demanding ones, among them:
The flat resistor application methods are based on the type of support on which it will be laid, and temperature to withstand.
This heater typical applications are:
Sterilizers, small flat bottom basins, confectionery industry machines, wood-working machines, wrapping and packaging machines, textile industry machines.
CERTIFIED QUALITY PRODUCT
The Mica flat resistors entire production cycle is subject to the strictest dimensional checks and electric tests in compliance with the standards set forth by our own ISO 9001:2008 certified Corporate Quality System, and in full compliance with the CEI/EN requirements in force.
The various operating temperatures require different combinations between type of external sheath and internal insulation, among the ones listed here below:
| Operating temperature | External sheath | Internal insulation | Electric contacts finishing |
| 100° C | Anodized iron | Micanite | Cables/ Pins/ Clamps |
| 200° C | Anodized iron | Micanite | Cables/ Pins/ Clamps |
| 300° C | Anodized iron | Micanite | Cables/ Pins/ Clamps |
| 400° C | AISI 304 | Ceramic/Micanite | Pins/ Clamps |
| 500° C | AISI 321 | Ceramic | Pins/ Clamps |
| 600° C | AISI 321 | MGO/Ceramic | Pins/ Clamps |
| 700° C | AISI 321 | MgO | Pins/ Clamps |
The above indicated combinations are those commonly used in different applications, at the specific temperatures for each type.
A heater improper use compared to the initial design relieves the manufacturer from any liability.
STANDARD RESISTORS INCLUDED IN THE CATALOGUE
This heaters typology can be manufactured upon client’s specifications and also in standard version, whose we have in stock at warehouse some models, based on power type, voltage, external sheath diameter and finishing type.
SOME EXAMPLES:
For more details see the section “Download Area“
or request a quote online by filling out the “Quotation Request Form“
