PROCESS HEATERS / ELECTRIC HEAT EXCHANGERS (ATEX AND NON-ATEX) GENERAL CHARACTERISTICS: The flanged or on-cap electric heaters (threaded fitting) installed inside a pressurised cylindrical, insulated or non-insulated container) are called process heaters or electric heat exchangers manufactured to satisfy the most different industrial applications for fluids, air or gas heating sector.. This heaters typology grants [...]
>> ATEX FLANGED heaters for immersion
ATEX FLANGED heaters for immersion GENERAL CHARACTERISTICS: The flanged electric heaters are manufactured for different industrial applications for liquid substances heating. In addition, this heaters typology grants high performances and efficiency in maintaining at the established temperature high volumes of fluids (water, industrial oils such as fuel oil or thermal oil, gas and air). The [...]
>> On-cap ATEX heaters for immersion
On-cap ATEX heaters for immersion GENERAL CHARACTERISTICS: The on-cap electric heaters (threaded fitting) electric heaters are made for different industrial applications envisaged for liquid substances heating. In addition, this heaters typology grants high performances and efficiency in maintaining the temperature of fluids high volumes (water, industrial oils such as fuel oil or thermal oil, gas and [...]
>> On plate resistors (die-casted aluminium)
ON PLATE RESISTORS (die-casted aluminium) GENERAL CHARACTERISTICS The die-casted electric resistors (so called on plate) are designed for many industrial applications requiring thermal treatment of fluids and liquid substances, even if they are commonly used to heat water. TECHNICAL DATA And ‘possible to make various types of electric heaters in the die, both as [...]
>> Single-pipe heaters for corrosive fluids
Single-pipe heaters for corrosive fluids GENERAL CHARACTERISTICS: Using fairly simple manufacturing processes, it is possible to manufacture particularly sturdy and reliable heaters, to be used in perfect safety in highly corrosive environments. The wise combination between quality of raw materials and experience was able to obtain a product compliant with the highest standards requested by [...]
>> Fluids single-pipe heaters
FLUIDS SINGLE-PIPE HEATERS GENERAL CHARACTERISTICS: As a valid alternative to traditional electric heaters, the fluids heating single-pipe electric heaters (water, oil, naphtha, etc.) are made with armoured cover (tube) stainless steel AISI 316L, inside of which a thermal field is introduced that during operation, can also reach particularly high operating temperatures, close to 800°C. This [...]
>> Flanged Industrial electric resistors for immersion
Flanged Industrial electric resistors for immersion GENERAL CHARACTERISTICS: The flanged electric heating resistors are manufactured for various industrial applications for liquid substances heating. Furthermore, this heaters typology optimally grants high performance and efficiency in keeping fluids high volumes at constant temperature (water, industrial oils such as fuel oil or thermal oil, gas and air). [...]
>> Screw-plug immersion resistors
SCREW-PLUG IMMERSION RESISTORS GENERAL CHARACTERISTICS: The electric resistors on threaded fitting for immersion use (so called “screw-plug”) are designed for all the applications concerning the liquids or gas thermal treatment subject to static or forced convection. They can be manufactured for use in many industrial applications for heating liquid substances. Their typology, both for standard [...]
>> Water boiler heaters (RT type)
WATER BOILER HEATERS (RT type) GENERAL CHARACTERISTICS: The water boiler heaters and resistors on threaded fitting with rigid bulb unipolar thermostat (so called “RT” type) are designed for sanitary use water heating inside water boilers of small capacity, for mainly home use. Their typology, both for standard and non-standard models, consists of a first quality [...]
