Single-pipe heaters for corrosive fluids
GENERAL CHARACTERISTICS:
Using fairly simple manufacturing processes, it is possible to manufacture particularly sturdy and reliable heaters, to be used in perfect safety in highly corrosive environments.
The wise combination between quality of raw materials and experience was able to obtain a product compliant with the highest standards requested by the various sectors of use.
The external sheaths are made of various types of materials that makes them proof against the various typical acid combinations of these sectors.
Among the different sheath materials, it can be found:
- Iron 360
- Lead (SPA alloy)
- Pure lead
- Stainless steel AISI 304 – 321 – 316
- Titanium
- Porcelain
- Pyrex
- PTFE (Politetrafluoroetilene)
Technical data
Some uses
The corrosive fluids single-pipe heaters are specifically used in galvanic baths, in order to heat or fluidify various highly corrosive chemical components.
They are also used in all those cases where the heater is immersed vertically.
Substance and density table
The table indicates some of the most common uses in the galvanic technology sector, where the immersion resistors are used. The table also indicates the surface density (W/cm²) of the heater active section, referred to the type of supply it was built with.
Note: The above data are purely indicative and do not take into consideration the infinite variants during the manufacturing phases or the different products concentration used case by case. Therefore, damages deriving by the heater different and/or improper use are totally attributable to the user’s negligence.
CERTIFIED QUALITY PRODUCT
The entire production cycle of thermo immersion PTFE (Politetrafluoroetilene) resistors is subject to the strictest dimensional checks and electric tests in compliance with the standards set forth by our own ISO 9001:2008 certified Corporate Quality System, and in full compliance with the CEI/EN requirements in force.
PTFE STANDARD THERMO IMMERSION RESISTORS
- We have in stock at warehouse various standard versions for prompt delivery.
- Standard voltage: Three-phase V220/380 or V230/400
- Powers: from 1000 to 4000W
- Surface density: from 1.67 to 2.77 W/cm2
- Side A: from 500 to 1100 mm
External sheath:
- Iron galvanic single-pipes (suitable for non-corrosive or oil-based solutions and for caustic soda low concentration prewashing baths)
- AISI304 galvanic single-pipes (suitable for non-corrosive solutions, in some cyanuric components electrolytic baths and in some dissolved organic acids)
- AISI316 galvanic single-pipes (suitable for non-corrosive solutions, in some cyanuric components electrolytic baths and in some dissolved organic acids)
- Titanium galvanic single-pipes (indicated for reactive solutions, copper plating baths and gold-plating cyanuric-base baths, chrome baths, nitric acid and in some organic acids baths)
SOME EXAMPLES:
For more details see the section “Download Area“
or request a quote online by filling out the “Quotation Request Form“
